Hubs
Dust off that truing stand for a fresh wheel build.
Genuine replacement parts
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset.
- Bontrager rear hub for use with 148mm dropouts
- Flange diameter: 58mm
- NDS flange offset: 35.5mm
- DS flange offset: 21.5mm
- 28-hole, 6-bolt rotor
- Available with Shimano or SRAM XD freehubs
- Rapid Drive 108 hub instantly transfers effort into forward momentum
$29.21
15x142mm conversion kit for Hope Fatsno front hubs.
$30.00
SRAM's 506 hub borrows technology from its more expensive brethren to bring you a solid hub at a great price. An aluminum hubshell with hi/lo flanges provide no-nonsense durability and even spoke tension. Dependable cup and cone bearings with polished races roll smooth for the long haul and a strong, steel quick-release axle holds up under pressure.
$31.99
The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts.
- Double contact sealing
- Super polished bearing races for low friction rolling
- 6-bolt ISO disc mounting surface
$32.29
Hope Front Axle Conversion Kits
· Compatible with Pro 2 and Pro 2 Evo hubs
· Converts all Hope Pro 2 and Pro 2 Evo front hubs to 20mm through axle hubs
$32.29
Hope Front Axle Conversion Kits
· Compatible with Pro 2 and Pro 2 Evo hubs
$32.99
Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling.
- Internal O-rings and grease sleeve
- High quality, sealed Cup & Cone Bearing
- High durability and smooth rolling for sustained performance
$33.99
The Shimano HB-RS470 front disc brake hub features a Center Lock design, Internal Grease Sleeve, and Cup and Cone Bearing technology.
- The Center Lock system makes for easy rotor installation with a quick and secure spline mount and lock ring
- Hub features internal o-rings and a grease sleeve that helps maintain grease levels and increases service life
$45.99
With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds.
- Easy disc brake rotor installation with Center Lock spline mount and lock ring
- Tool-free 15mm thru axle system is stiff and lightweight
- Simple setup and reliable trail performance
$53.99
Shimano XT M756 front hub.
- Double contact sealing
- Super polished bearing races for low friction rolling
- Light alloy QR lever and nut
- 6-bolt ISO disc mounting surface
$56.99 - $75.99
Shimano XT FH-M8010/M8000 Rear Hubs.
- Double contact bearing seals
- Super polished bearing races for low friction rolling
- Shimano Quick-engagement freehub
- Not compatible with Shimano 11-Speed Road cassettes
- Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability
- Center Lock disc brakes provide reliable braking power (lockring sold separately)
$57.99
With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds.
- Easy disc brake rotor installation with Center Lock spline mount and lock ring
- Tool-less 15mm thru axle system optimizes rigidity and weight
- Simple setup and reliable trail performance
$60.00
Track stars and fixed-gear converts will love Surly's Ultra New Front Hub. This gorgeous hunk of aluminum sports sealed bearings for all-weather reliability and low friction. And, the hollow axle is forged from flex-free chromoly for steering precision, long-lasting durability and simple quick-release compatibility.
$68.99
Shimano XT FH-M756 Series Rear Hub
- Double contact bearing seals
- Super polished bearing races for low friction rolling
- Light alloy QR lever and nut
- 6-Bolt rotor mount
- Bearing Type: Loose Ball
- Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed
- Center to Flange, Left: 33.5
- Center to Flange, Right: 20.5
- Flange Diameter Left: 61
- Flange Diameter Right: 61
- Hub Drilling: 32
- Hub/Brake Compatibility: 6-Bolt Disc
- Rear Axle: QR x 135mm
- Skewer Included: Yes
- Spoke Interface: J-Bend
- Weight: 495 grams
$69.99
The Vandero hub is back and better than ever. This new PRO version of the Vandero is a precision sealed hub with proven in-bound 3/8-inch axle bolts and two plastic guards.
Features:
- 7075-T6 aluminum hub shell
- 6903RS sealed cartridge ball bearings
- Precision bored fully concentric bearing seats for a smoother spin and prolonged bearing life
- 17mm 7075-T6 aluminum axle with steel helicoil thread inserts
- 3/8-inch heat-treated chromoly axle bolts with 17mm wrench flats and a 6mm hex slot
- Weight: 11.2oz
- Replaceable plastic hub guards included
$75.00
Track stars and fixed-gear converts love Surly's Ultra New Track Rear Hub! This gorgeous hunk of aluminum boasts reliable sealed bearings, and your choice of fixed/fixed or fixed/free gearing. Plus, this hub's 120mm width fits most track frames and the flex-free solid axle is forged from rugged chromoly.
$75.00
Build your singlespeed or fixie bike around Surly's Ultra New Roadie Rear Hub. This gorgeous hunk of aluminum has the capability you need and reliable sealed bearings, too! It sports threads for a track cog and lockring on one side and a freewheel on the other so you can decide how you want to roll. Plus, this hub's 130mm width fits most road frames and the hollow chromoly axle provides a flex-free ride as well as simple quick release skewer compatibility.
$76.90
Direct power meets simplicity—running smoothly day-in and day-out.
The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
$76.90
Direct power meets simplicity—running smoothly day-in and day-out.
The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
$77.70
DT Swiss Sinc Ceramic cartridge bearings.
- The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally
$77.70
DT Swiss Sinc Ceramic cartridge bearings.
- The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally
$77.70
DT Swiss Sinc Ceramic cartridge bearings.
- The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally
$85.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical.
We've ridden them on all kinds of bikes from mtb to road and we're in love. They are reliable, dang light and very reasonably priced.
We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release, 12mm, and 15mm endcaps are included.
On all models we spec high-quality made in Japan stainless-steel sealed bearings.
Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity in our modern world.
- Weight: Disc Brake: 164g
- Includes 12mm, 15mm endcaps and quick release skewer
- Non-Drive Side Center To Flange Disc Brake: 21mm
- Drive Side Center To Flange Disc Brake: 36mm
- Non-Drive Flange Diameter Disc Brake: 58mm
- Drive Side Flange Diameter Disc Brake: 45mm
$85.00
New Sheriff hubs are the ultimate in track racing hubs. They minimize weight with larger cutouts in the flanges, lightened axles, shorter bolts, and slimmer end caps than previous versions. The result is a hubset that weighs a mere 432g, 198g for the front, and 234g for the rear. This makes it one of the lightest track hubsets in the world, a figure even more impressive when you consider that All-City didn't eliminate the usefulness of a fixed / fixed or fixed / free option as most racing hubs do.
They feature the finest Japanese manufactured 6902 bearings which roll incredibly fast and smooth while retaining excellent seals for all weather, all-day everyday durability.
Front hub specs:
- Weight: 198g
- Torque Spec: 33nm (25ft lbs.)
- Non-Drive Side Center to Flange: 34mm
- Drive Side Center to Flange: 34mm
- Non-Drive Side Flange Diameter: 62mm
- Drive Side Flange Diameter: 62mm
Rear hub specs:
- Weight: 234g
- Torque Spec: 33nm (25ft.lbs.)
- Non-Drive Side Center to Flange: 29mm
- Drive Side Center to Flange: 29mm
- Non-Drive Side Flange Diameter: 62mm
- Drive Side Flange Diameter: 62mm
$85.00
Surly's Ultra New Disc Front Hub is a gorgeous hunk of aluminum that boasts reliable sealed bearings and a 6-bolt disc attachment. The forged chromoly axle is flex-free for steering precision, long-lasting durability and simple quick-release compatibility.
$89.90
- Kick-shift 2-speed hub
- Coaster brake
- Benefits include its simple backpedal-action shifting/braking and no cables or shifters
- 6061 aluminum hub shell with 13/32" slotted solid axle (162mm overall axle length)
- Gear ratio range of 138%
- Includes 22 tooth 3-spline cog
- 116mm OLD (over-locknut dimension)
$89.99
- eMTB rated with steel axles
- 6902 cartridge bearings and robust 10 degree engagement
- 32h spoke count
- For J-Bend spokes only
$90.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Fully convertible with tool-free end caps
- 24, 28 or 32 spoke holes
Page 1 of 3
Next page